Redline Communications AN-50e Specifications download pdf (Page 16)

From the IP Generator – Parameters tab the protocol as well as the destination IP address and

port can be specified. These values need to match with the values that are set under the IP

Answering – Parameters + Statistics tab. The parameters #x button access the parameters screen

shown in Figure 3.5.

Fig 3.5 IP Generator Parameter Tab. This tab sets the protocol to use as well as the destination IP address and

port.

Fig 3.6 IP Answering Parameters Tab. This tab sets the source IP address and port. The protocol is also specified

on this tab.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

No comments

Redline Communications AN-50e Specifications Page 16